1000kg 1500kg 2000 Kg Electric Pallet Reach Truck 4 M 4.5m 5m
Product Application
Single Scissor Electric Reach Stacker for Narrow Aisle Electric Reach Forklift Trucks
CQDS series reach stacker cranes are suitable for large capacity and high lift cargo storage applications. The rated load is 1500Kg-2000kg and the maximum lifting height is 6000mm. It has the feature of moving the gantry forward as a whole, with small turning radius, so that the baffle code at the bottom of the shelves can be ignored. Suitable for large-scale three-dimensional factories, warehouses, supermarkets and wharves to store goods.
Main Features
1. Equipped with electronic drive wheels, which makes the operation more flexible and convenient, and has the function of turning and deceleration.
2.280Ah large-capacity battery can be used for long time work, and the side-pull battery can be replaced at any time.
3.One-piece forged forks with stronger load-bearing and up and down swing function. Suitable for all kinds of single-sided, double-sided, tic-tac-toe and chuan-tac-toe pallets.
4. Large oil cylinder to ensure that the whole gantry move forward gently, up and down smoothly.
Specification
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | Stepless Speed Regulation | Stepless Speed Regulation | Stepless Speed Regulation |
| | | | | |
Mast Tilt Angle (front/rear) | | | | |
| | | | | |
Driving Speed with Full Loads | | | | |
Maximum gradient with full load | | | | |
| | | | | |
| | | | | |
| | | | | |
Overall dimensions(L*W*H) | | | | |
| | | | | |
| | | | | |
| | | | | |
lncreased height each tonnage | | 1600/2000/2500/ 3000/3500 | | |
| | | 2100/1600/1850/ 2100/2350 | | |
What is A Reach Truck?
A reach truck is an electric type of forklift that is designed to pick up and put away inventory. It works well in spaces with narrow aisles that require a small turning radius such as warehouses and storage facilities.
Reach trucks have a single set of wheels in the back that are located below the driver’s seat position and two outer legs that help distribute the load. One unique feature is that the driver sits sideways when operating a reach truck. Because of the design of the legs, reach trucks do not need a counterweight to balance the load.
They are best for storing and retrieving pallets in racks and can often shelve pallets one or two deep.They are also able to reach much higher than traditional forklifts. This means with a reach truck, you can store product higher and access pallets deeper than with a forklift.
